+30 2741074225

My shopping cart

You have no items in your shopping cart.
Picture of NFP Carbide TC-104 Cone Medium Roughness 6.6x12.7mm

NFP Carbide TC-104 Cone Medium Roughness 6.6x12.7mm

The Ceramic Zirconia Tree ZC-104 NQ from NFP is a medium-strength cutter made of high-strength ceramic zirconia. The size of the cutter tip is 6.6 mm in diameter and 12.7mm high. The speed range for safe use of the cutter to avoid injuries and not to force the wheel is from 10,000 to 20,000 rpm. This cutter is ideal for removing semi-permanent, Gel and acrylic (artificial nails).
Product code: 0031772
10.00€
The Ceramic Zirconia Tree ZC-104 NQ from NFP is a medium-strength cutter made of high-strength ceramic zirconia. The size of the cutter tip is 6.6 mm in diameter and 12.7mm high. The speed range for safe use of the cutter to avoid injuries and not to force the wheel is from 10,000 to 20,000 rpm. This cutter is ideal for removing semi-permanent, Gel and acrylic (artificial nails).

The Ceramic Tree Cutter ZC-104 NQ is made of 93% ceramic zirconia and is a very innovative material as it is extremely hard, resistant to corrosion by chemicals and its biggest advantage over metals is that it is fireproof and does not heat up by abrasion.

Attention: the cutters are aimed at professionals who know their use and are familiar with it. Improper use of cutters can cause injuries. The purchase and use of the product by a non-specialist is not the responsibility of Roukis Professional.

Important note:
Zirconia cutters should not be sterilized in UV sterilizers as ultraviolet radiation alters their chemical composition resulting in wear and yellowing. And because the oven is not suitable for these cutters either, sterilization with sterilization fluid is recommended. Spraying or short immersion (up to 20 minutes) and not with the days because then the metal stem will rust.

Information

Need help

Copyright © 2024 Roukis Professional. All rights reserved.
Powered by nopCommerce. Designed & Developed by ALEXCIS.